EMC VPLEX

Setting up a VPLEX Local implementation
39
Setting up VPLEX
Figure 27 PuTTY configuration: Scrollback setting
• Another solution to long displays is to save the session output to a log file.
Over the course of setting up a dual-engine or quad-engine cluster, the log file
can grow quite large. If you want to create a log file anyway:
a. Select Logging in the PuTTY Configuration Category list.
b. Under Session logging, select All session output.
c. Type a name in the Log file name field (shown in Figure 28).
Note: The log file saves data from the current PuTTY session. Any time you open a
new session, you must repeat this step if you want to log the output for that session.
Figure 28 PuTTY Configuration: Logging window
scrollback
Set to 20000
putty_log
All session output
File name