EMC VPLEX User Manual

Setting up a VPLEX Metro implementation
53
Setting up VPLEX
35. Select Window in the Category list, and set Lines of scrollback (shown in
Figure 37)to20000. (This allows you to read long output in a standard-size
PuTTY session window.)
Figure 37 PuTTY configuration: Scrollback setting
36. If you want to save the session output to a log file:
a. Select Logging in the PuTTY Configuration Category list.
b. Under Session logging, select All session output.
c. Type a name in the Log file name field (shown in Figure 38).
Note: Over the course of setting up a dual-engine or quad-engine cluster, the log file can
grow quite large.
Note: The log file saves data from the current PuTTY session. Any time you open a new
session, you must repeat this step if you want to log the output for that session.
scrollback
Set to 20000

EMC VPLEX Specifications

General

Data Mobility	Yes
Replication	Synchronous and asynchronous
Virtualization	Yes
Category	Storage
Vendor	EMC
Function	Storage virtualization, data mobility, replication, high availability, disaster recovery
High Availability	Yes
Disaster Recovery	Yes
Connectivity	Fibre Channel, iSCSI