EMC VPLEX User Manual

EMC VPLEX with GeoSynchrony 4.1 Installation and Setup Guide
48
Setting up VPLEX
Figure 32 PuTTY configuration: SSH protocol
14. For most of the setup tasks, you can leave your laptop connected directly to the
management server, or you can move to a more-comfortable location and
reconnect to the management server over the customer network:
• If you are going to move your connection (as described later), go to step 15.
• If you are going to remain connected directly for the entire setup procedure on
this management server, follow these steps:
Note: You will perform the same steps on the second management server later.
a. Select Window in the Category list, and set Lines of scrollback (shown in
Figure 33 on page 49)to20000. (This allows you to read long output in a
standard-size PuTTY session window).
SSH protocol
version
putty_ssh

EMC VPLEX Specifications

General

Data Mobility	Yes
Replication	Synchronous and asynchronous
Virtualization	Yes
Category	Storage
Vendor	EMC
Function	Storage virtualization, data mobility, replication, high availability, disaster recovery
High Availability	Yes
Disaster Recovery	Yes
Connectivity	Fibre Channel, iSCSI