Setting up a VPLEX Metro implementation
49
Setting up VPLEX
Figure 33 PuTTY configuration: Scrollback setting
b. If you want to save the session output to a log file:
Note: Over the course of setting up a dual-engine or quad-engine cluster, the log
file can grow quite large.
Note: The log file saves data from the current PuTTY session. Any time you open a
new session, you must repeat this step if you want to log the output for that session.
scrollback
Set to 20000
i.
ii.
iii.
Select Logging in the PuTTY Configuration Category list.
Under Session logging, select All session output.
Type a name in the Log file name field (shown in Figure 34 on
page 50).
To Next Page
Loading...
