Operation
91 Liebert
®
SRC™ User Manual
8.0 Operation
8.1 Operating the Unit
Use the ON/OFF button on the indoor unit to operate the system.
1. Depending on the type of unit, Type 1 or Type 2 (Figure 8-1), open the front cover.
2. Press the ON/OFF button.
Figure 8-1 On/Off button location
NOTE
• If the horizontal vane opens rapidly, the stepping motor may be broken.
• The fan speed is set too high. Depending on the model, fan speed may be
changed.
• You cannot change temperature using this ON/OFF button.
• For cooling-only models, the temperature is set to 71.6°F (22°C).
• For cooling-and-heating models, the temperature is set from 71.6°F (22°C)
to 75.2°F (24°C).
To Next Page
Loading...
Need help?
General
