Emerson Liebert SRC18 User Manual

Operation
Liebert
®
SRC
™
User Manual 94
8.5.3 Selecting Heating Mode
1. On the thermostat, press to power-on the indoor unit.
2. Press until displays in the operation-mode section.
3. Adjust the temperature setting by pressing .
8.5.4 Selecting Dehumidification Mode
Dehumidification removes moisture from a highly-humid environment, especially during the rainy season,
to prevent mold from setting-in. Dehumidification mode adjusts room temperature and fan speed
automatically to maintain the optimal humidity level.
1. On the thermostat, press to power-on the indoor unit.
2. Press until displays in the operation-mode section.
8.5.5 Selecting Fan Mode
Fan mode circulates indoor air without changing the room temperature.
1. On the thermostat, press to power-on the indoor unit.
2. Press until displays in the operation-mode section.
8.5.6 Selecting Auto Mode
Auto mode changes modes automatically to maintain the temperature setpoint within ±3.6°F (±2°C).
When operating in auto mode, the Auto icon and cool, heat, etc. icon display simultaneously in the
Operating Mode section to indicate the current mode.
1. On the thermostat, press to power-on the indoor unit.
2. Press until displays in the operation-mode section.
NOTE
The temperature range varies depending on Installer set-up.
• Factory default is 64~86°F (18~30°C).

Emerson Liebert SRC18 Specifications

General

Brand	Emerson
Model	Liebert SRC18
Category	Air Conditioner
Language	English