Emerson Process Management GmbH & Co. OHGS-4
X-STREAM X2FD
Instruction Manual
HASXMDE-IM-EX
01/2015
Symbols used in this manual
Where one or more of the following symbols appear within this manual, carefully read the rela-
ted information and instructions!
Strictly observe the given warnings, instructions and information to minimize hazards!
This symbol used in the manual ... ... means
dangerous voltages may be exposed
hot surfaces may be exposed
possible danger of explosion
toxic substances may be present
substances harmful to health may be present
indicates notes relating to heavy instruments
electrical components may be destroyed by
electrostatic discharges
units must be disconnected from the power
source
indicates special instructions or information for
operation at low temperatures.
indicates basic conditions or procedures are
being described.
This symbol may also indicate information impor-
tant for achieving accurate measurements.
To Next Page
Loading...
Need help?
General
