Emerson Process Management GmbH & Co. OHG S-5
S
Safety Instructions
X-STREAM X2FD
Instruction Manual
HASXMDE-IM-EX
01/2015
SAFETY INSTRUCTIONS
General Safety Notice / Residual Risk
If this equipment is used in a manner not specifi ed in these instructions, protective systems may
be impaired.
Despite of incoming goods inspections, production control, routine tests and application of state-
of-the-art measuring and test methods, an element of risk remains when operating a gas analyzer!
Even when operated as intended and observing all applicable safety instructions some residual
risks remain, including, but not limited to, the following:
• An interruption of the protective earth line, e.g. in an extension cable, may result in risk to
the user.
• Live parts are accessible when operating the instrument with doors open or covers removed.
• The emission of gases hazardous to health may even be possible when all gas connections
have been correctly made.
Avoid exposure to the dangers of these residual risks by taking particular care when installing,
operating, maintaining and servicing the analyzer.
Additional Literature
This manual covers aspects specifi c for using fl ameproof X-STREAM X2FD gas analyzers
in hazardous (classifi ed) areas, only.
For comprehensive information on operating and maintain/service the instrument in a
safe manner it is MANDATORY to read all additional instruction manuals, if not provided
as printed version, see the accompanying USB stick for an electronic version (PDF)!
The following instruction manuals are available and/or referenced within this manual at hand:
HASX2E-IM-HS X-STREAM X2 series instruction manual
HASICx-IM-H Infallible Containment
The original manufacturer's cable gland or conduit instruction manual, depending on what is used.
Contact your local service center or sales offi ce when missing documents.
SAVE ALL INSTRUCTIONS FOR FUTURE USE!
Intended Use Statement
X-STREAM fl ameproof analyzers are intended to be used in hazardous (classifi ed) areas of Zone 1
or Division 2, depending on the nameplate label marking. Installation in Zone 0 or Division 1 is
not permitted and causes risk of explosion!
X-STREAM series gas analyzers are intended to be used as analyzers for industrial pur-
poses. They must not be used in medical, diagnostic or life support applications. Using
X-STREAM analyzers as safety devices is prohibited where redundancy and/or SIL classifi cation
or equivalent is needed. No independent agency certifi cations or approvals are to be implied as
covering such applications!
To Next Page
Loading...
Need help?
General
