Emerson Process Management GmbH & Co. OHG5-2
X-STREAM X2FD
Instruction Manual
HASXMDE-IM-EX
01/2015
5.1 Dismounting & Disposal
When the instrument has reached the end of its useful life,
When the instrument has reached the end of its useful life, do not throw it in a
trash can!
This instrument has been made of materials to be recycled by recyclers speci-
alised in this fi eld. Let the instrument and the packing material duly and envi-
ronmently friendly be disposed of. Ensure the equipment is free of dangerous
and harmful substances (decontaminated).
Take care of all local regulations for waste treatment.
Consider all instructions regarding dismounting and disposal!
• purge all gas lines with inert gas
• ensure all gas lines are pressureless
• disconnect all gas lines
• switch off power and signal lines
• disconnect and remove all electrical connections
• support the instrument before loosening the fi xing screws (risk of dropping instrument) and
take it off its stand or wall
• fi ll out the Declaration of Decontamination (
X-STREAM X2 instruction manual) properly
• hand over the dismounted instrument together with the Declaration of Decontamination to
a disposal specialist. The disposal specialist then has to disassemble the instrument, and
recycle and dispose it in compliance with all applicable waste treatment regulations.
GASES HAZARDOUS TO HEALTH
Follow the safety precautions for all applied gases and gas cylinders.
Before opening the gas lines, they must be purged with air or neutral gas
(N2) to avoid danger from escaping toxic, fl ammable, explosive or hazardous
gases.
To Next Page
Loading...
Need help?
General
