Emerson Process Management GmbH & Co. OHG S-7
S
Safety Instructions
X-STREAM X2FD
Instruction Manual
HASXMDE-IM-EX
01/2015
Safety Instructions
EXPLOSION HAZARD BY MODIFICATION
Any addition, substitution, or replacement of components installed on or
in this device, must be certifi ed to meet the hazardous area classifi cation
that the device was certifi ed to prior to any such component addition,
substitution, or replacement. In addition, the installation of such device or
devices must meet the requirements specifi ed and defi ned by the hazardous
area classifi cation of the unmodifi ed device.
Any modifi cations to the device not meeting these requirements, will void
the product certifi cation(s).
Contact Emerson Process Management‘s customer service center for
return authorization.
POSSIBLE EXPLOSION HAZARD
Do not open instrument when energized.
Ensure that external circuitry is disconnected or de-energized before
opening the instrument.
Ensure that all gas connections are made as labeled and are leak free.
Improper gas connections could result in explosion and death.
EXPLOSION HAZARD
The X-STREAM X2FD analyzer may utilize not only sample gas but one or
more pressurized carrier gases and/or calibration gases.
If an external fl owmeter is required for fl ow control, legislative requirements
and instructions for installation in hazardous (classifi ed) areas must be
considered.
To Next Page
Loading...
Need help?
General
