Emerson X-STREAM XE - Page 409

Emerson Process Management GmbH & Co. OHG 8-39
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
8
Troubleshooting
8.4 Troubleshooting on Components
Step 1:
Check the solder bridges, located at
the solder side of the board, for proper
conguration:
LB10 open
LB4 2-5 closed
LB21 1-4 closed
LB20 open
Step 2:
Switch on the analyzer.
The onboard LED will light up red and
green.
LED
When the warmup time has elapsed,
the LED ashes green.
LED
LB21
LB4
LB20
LB10
LED