PROline Promag 53 10 Technical data
Endress+Hauser 131
Promag H
Transmitter housing:
• Compact housing: powder coated die-cast aluminum or
stainless-steel field housing 1.4301/316L
• Wall-mounted housing: powder coated die-cast aluminum
Sensor housing: 1.4301
Wall mounting (holder panel): 1.4301
Measuring tube: stainless steel 1.4301 or 1.4306/304L
Flange:
• All connections 1.4404/316L
• Flanges (DIN, ANSI, JIS) made of PVDF
• Adhesive fitting made of PVC
Ground rings: 1.4435/316L, platinum (Basic material: Titanium Grade 2, Platinum
coating at least 12 µm), Alloy C-22
Electrodes:
• Standard: 1.4435
• Option: Alloy C-22, tantalum, platinum/rhodium 80/20 (up to 1"/DN 25 only)
Seals:
• 1/12" to 1" (DN 2 - 25): O-ring (EPDM, Viton, Kalrez) or gasket seal (EPDM, silicone,
Viton)
• 1-1/2" to 4" (DN 40 - 100): gasket seal (EPDM, silicone)
Material load diagram The material load diagrams (pressure-temperature graphs) for the process connections
are to be found in the following documents:
• Technical Information “Promag 50/53 W” (TI 046D/24/ae)
• Technical Information “Promag 50/53 P” (TI 047D/24/ae)
• Technical Information “Promag 50/53 H” (TI 048D/24/ae)
Fitted electrodes Promag W:
Measuring, reference and EPD electrodes
• Standard available with 1.4435, Alloy C-22, tantalum
• Optional: exchangeable measuring electrodes made of 1.4435 (14" to 78"/DN 350 -
2000)
Promag P:
Measuring, reference and EPD electrodes
• Standard available with 1.4435, Alloy C-22, tantalum
• Optional: reference electrode and EPD electrodes made of platinum/rhodium 80/20
Promag H:
Measuring electrodes and EPD electrodes
• Standard available with 1.4435, Alloy C-22, tantalum, platinum/rhodium
• 1/12" to 3/8" (DN 2 - 8): without EPD electrode
To Next Page
Loading...
