Endress+Hauser PROline promag 53 - Dimensions Promag 53 H

PROline Promag 53 10 Technical data
Endress+Hauser 147
10.7 Dimens ions Promag 53 H
Promag H / 1/12" to 1" / DN 2 - 25 (compact version)
Fig. 73: Dimensions Promag H / 1/12" to 1" / DN 2 - 25 (compact version, aluminum field housing)
Fig. 74: Dimensions Promag H / 1/12" to 1" / DN 2 - 25 (compact version, stainless-steel field housing)
DN PN ** DI L K M
DIN
[mm]
ANSI
[inch]
DIN
psi (bar)
inch (mm) inch (mm) inch (mm) [mm]
2 1/12 230/580 (16/40) 0.09 (2.25) 3.39 (86) 1.69 (43) M 6x4
4 5/32 230/580 (16/40) 0.18 (4.5) 3.39 (86) 1.69 (43) M 6x4
8 5/16 230/580 (16/40) 0.35 (9.0) 3.39 (86) 1.69 (43) M 6x4
15 1/2 230/580 (16/40) 0.63 (16.0) 3.39 (86) 1.69 (43) M 6x4
– 1 230/580 (16/40) 0.89 (22.6) 3.39 (86) 2.09 (53) M 6x4
25
− 230/580 (16/40) (26.0) (86) (53) M 6x4
Overall fitting length will depend on the process connections
→ Page 151
** The permissible nominal pressure depends on the process connection and seal:
– 580 psig (40 bar): flange, welded nipples (with O-ring seal)
– 230 psig (16 bar): all other process connections
F06-53Hxxxxx-06-00-xx-xx-001
Dimensions in inches (mm)
F06-53Hxxxxx-06-00-xx-xx-002
Dimensions in inches (mm)