PROline Promag 53 5Operation
Endress+Hauser 69
5.4.1 Operating opt ions
For the complete operation of the field device, including device-specific commands,
there are Device Description (DD) files available to the user to provide the following
operating aids and programs:
HART Communicator DXR 275
Selecting device functions with a HART Communicator is a process involving a number
of menu levels and a special HART function matrix. The HART Communicator manual
contains more detailed information on the device.
FieldTool™ operating program
FieldTool™ is a universal service and configuration software package designed for the
PROline field devices. Connection is by means of a HART-Modem, e.g. Commubox FXA
191.
The functionality of FieldTool™ includes the following:
• Configuration of device functions
• Visualization of measuring values (including data logging)
• Data backup of device parameters
• Advanced device diagnosis
• Measuring-point documentation
You can find more information on FieldTool™ in the following E+H document:
System Information: SI 031D/06/en “FieldTool™”
Other operating programs
• Operating program “AMS” (Fisher Rosemount)
• Operating program “SIMATIC PDM” (Siemens)
!
Note:
• The HART protocol requires the “4-20 mA HART” or “4-20 mA (25 mA) HART” setting
in the CURRENT SPAN function (current output 1).
• HART write protection can be disabled or enabled by means of a jumper on the
I/O board → Page 82.
To Next Page
Loading...
