Enterasys RoamAbout RBT-4102 - Page 100

Radio Interface
4-64 Advanced Configuration
Toviewthe current802.11gradiosettings,usetheshowinterfacewirelessgcommand.
Example
RoamAbout 4102#show interface wireless g
Wireless Interface Information
=========================================================================
----------------Identification-------------------------------------------
Description : "RD-AP4102"
SSID : r&d
802.11g band : 802.11g only
Channel : 8 (AUTO)
Status : Disable
----------------Antenna--------------------------------------------------
Antenna Select : Fixed
Fixed Antenna Control : Diversity
Antenna ID : 0x0000(Integrated antenna)
Ack-TimeOut : 0 us
----------------802.11 Parameters----------------------------------------
Transmit Power : FULL (17 dBm)
Max Station Data Rate : 6Mbps
Multicast Data Rate : 1Mbps
Fragmentation Threshold : 512 bytes
RTS Threshold : 256 bytes
Beacon Interval : 150 TUs
DTIM Interval : 5 beacons
Preamble Length : LONG
Maximum Association : 32 stations
Native VLAN ID : 1
VLAN State : ENABLED
----------------Security-------------------------------------------------
Secure Access : ENABLED
Multicast cipher : WEP
Unicast cipher : TKIP-WEP
PMKSA Lifetime : 720 minutes
WPA clients : NOT SUPPORTED
WPA Key Mgmt Mode : DYNAMIC
WPA PSK Key Type : HEX
Encryption : 64-BIT ENCRYPTION
Default Transmit Key : 1
Common Static Keys : Key 1: ***** Key 2: *****
Key 3: EMPTY Key 4: EMPTY
Pre-Authentication : Disabled
Authentication Type : SHARED
----------------Authentication Parameters--------------------------------
802.1X : DISABLED
Broadcast Key Refresh Rate : 0 min
Session Key Refresh Rate : 0 min
802.1X Session Timeout Value : 60 min
=========================================================================