Enterasys RoamAbout RBT-4102 - Using the CLI to Display AP Status

Status Information
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-97
Using the CLI to Display AP Status
Toviewthe currentaccesspointsystemsettings,usetheshowsystemcommandfromthe
Executivemode.Toviewthecurrentradiointerfac esettings,usetheshowinterfacewirelessaor
showinterfacewirelessgcommand.
Examples
.
RoamAbout 4102#show system
System Information
====================================================================
Serial Number : 034830992141
System Up time : 0 days, 5 hours, 8 minutes, 42 seconds
System Name : RoamAbout AP
System Location :
System Contact :
System Country Code : SG - SINGAPORE
Ethernet MAC Address : 00-01-F4-61-9C-08
802.11a MAC Address : Default=00-01-F4-61-9C-36 VAP1=00-01-F4-36-3C-36
VAP2=00-01-F4-36-4C-36 VAP3=00-01-F4-36-5C-36
VAP4=00-01-F4-36-6C-36 VAP5=00-01-F4-36-7C-36
VAP6=00-01-F4-36-8C-36 VAP7=00-01-F4-36-9C-36
802.11b/g MAC Address : Default=00-0C-DB-81-3D-CD VAP1=00-0C-DB-81-3D-CE
VAP2=00-0C-DB-81-3D-CF VAP3=00-0C-DB-81-3D-D0
VAP4=00-0C-DB-81-3D-D1 VAP5=00-0C-DB-81-3D-D2
VAP6=00-0C-DB-81-3D-D3 VAP7=00-0C-DB-81-3D-D4
IP Address: 10.2.43.203
Subnet Mask : 255.255.0.0
Default Gateway : 10.2.1.1
Management VLAN ID(AP : 3
IAPP State : ENABLED
DHCP Client : DISABLED
HTTP Server : ENABLED
HTTP Server Port : 80
HTTPS Server : ENABLED
HTTPS Server Port : 443
Slot Status : Dual band(a/g)
SSH Server : ENABLED
SSH Server Port : 22
Telnet Server : ENABLED
Com Port : ENABLED
Software Version : V1.0.17
====================================================================
RoamAbout 4102#