EasyManua.ls Logo

Enterasys RoamAbout RBT-4102 - Using the CLI to View Event Logs

Enterasys RoamAbout RBT-4102
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Status Information
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-109
Using the CLI to View Event Logs
Fromtheglobalconfigurationmode,usetheshowloggingcommand.
Examples
RoamAbout 4102#show logging
Logging Information
============================================
Syslog State : Enabled
Logging Console State : Enabled
Logging Level : Alert
Logging Facility Type : 16
Servers
1: 192.168.1.19, UDP Port: 514, State: Enabled
2: 0.0.0.0, UDP Port: 514, State: Disabled
3: 0.0.0.0, UDP Port: 514, State: Disabled
4: 0.0.0.0, UDP Port: 514, State: Disabled
=============================================
RoamAbout 4102#
Toviewthe accesspointlogentries,usetheshoweventlogcommandfromtheExecutivemode.
Toclearalllogentriesfromtheaccesspoint,usetheloggingclearcommandfromtheGlobal
Configurationmode.
RoamAbout 4102#show event-log
Mar 09 11:57:55 Information: 802.11g:11g Radio Interface Enabled
Mar 09 11:57:55 Information: 802.11g:Radio channel updated to 8
Mar 09 11:57:34 Information: 802.11g:11g Radio Interface Enabled
Mar 09 11:57:18 Information: 802.11g:11g Radio Interface Enabled
Mar 09 11:56:35 Information: 802.11a:11a Radio Interface Enabled
Mar 09 11:55:52 Information: SSH task: Set SSH server port to 22
Mar 09 11:55:52 Information: SSH task: Enable SSH server.
Mar 09 11:55:52 Information: Enable Telnet.
Mar 09 11:55:40 Information: 802.11a:11a Radio Interface Disabled
Mar 09 11:55:40 Information: 802.11a:Transmit Power set to QUARTER
Press <n> next. <p> previous. <a> abort. <y> continue to end :
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 4102(config)#logging clear\
RoamAbout 4102#
Toviewthe accesspointevententries,usetheshoweventscommandfromtheExecutivemode.
RoamAbout 4102#show events
Oct 21 10:19:18 Notice: 802.11b/g VAP2:Station Associated: 00-e0-63-50-3d-eb
Oct 21 10:19:18 Notice: 802.11b/g VAP2:Station Forwarding: 00-e0-63-50-3d-eb Encryption key
type=STATIC WEP
Oct 21 10:19:18 Notice: 802.11b/g VAP2:Station Authenticated: 00-e0-63-50-3d-eb
Oct 21 10:19:18 Notice: Successful Local MAC Address Authentication for station 00-E0-63-
50-3D-EB on Radio b/g VAP 2
Oct 21 10:18:17 Notice: 802.11b/g:Station Forwarding: 00-01-f4-64-3e-60 Encryption key
type=WPA-PSK-AES
Oct 21 10:18:17 Information: WPA 4-way handshaking successes at 00-01-f4-64-3e-60
Oct 21 10:18:17 Notice: 802.11b/g:Station Associated: 00-01-f4-64-3e-60
Oct 21 10:18:17 Notice: 802.11b/g:Station Authenticated: 00-01-f4-64-3e-60
Oct 21 10:18:17 Notice: Successful Local MAC Address Authentication for station 00-01-F4-
64-3E-60 on Radio b/g Default Interface
Oct 21 10:18:14 Information: 802.11b/g VAP7:Authentication Mode set to OPEN

Table of Contents

Other manuals for Enterasys RoamAbout RBT-4102

Related product manuals