Enterasys RoamAbout RBT-4102 User Manual

Initial Setup Using the CLI
3-2 Initial Configuration
•SettheemulationmodetoVT100.
•WhenusingHyperTerminal,selectTerminalkeys,notWindowskeys.
4. Onceyouhavesetuptheterminalcorrectly, presstheEnterkeytoinitiatetheconsole
connection.Theconsoleloginscreenisdisplayed.
ForinformationaboutthecommandsrefertotheRoamAboutRBT‐4102Wireless
AccessPoint
CommandLineInterfaceReferenceGuide.
Logging In
TousetheCLItominimallyconfiguretheaccesspoint,followthesesteps:
1. Enteradminfortheusername,andpasswordforthepasswordtologin.
TheRBT‐4102CLIpromptappears.
Username: admin
Password:********
RoamAbout 4102#
2. Ifapplicable,settheCountryCode.Thisrestrictsoperationoftheaccesspointtotheradio
channelspermittedforwirelessnetworksinthespecifiedcountry.
a. Typecountry?todisplaythelistofcountries.
RoamAbout 4102#country ?
WORD Country code: AL-ALBANIA, DZ-ALGERIA, AR-ARGENTINA, AM-ARMENIA,
AU-AUSTRALIA, AT-AUSTRIA, AZ-AZERBAIJAN, BH-BAHRAIN, BY-BELARUS,
BE-BELGIUM, BZ-BELIZE, BO-BOLVIA, BR-BRAZIL, BN-BRUNEI DARUSSALAM,
BG-BULGARIA, CL-CHILE, CN-CHINA, CO-COLOMBIA, CR-COSTA RICA,
HR-CROATIA, CY-CYPRUS, CZ-CZECH REPUBLIC, DK-DENMARK, DO-DOMINICAN
REPUBLIC, EC-ECUADOR, EG-EGYPT, SV-EL SALVADOR, EE-ESTONIA, FI-FINLAND,
FR-FRANCE, GE-GEORGIA, DE-GERMANY, GR-GREECE, GT-GUATEMALA,
HN-HONDURAS, HK-HONG KONG, HU-HUNGARY, IS-ICELAND, IN-INDIA,
ID-INDONESIA, IR-IRAN, IE-IRELAND, IL-ISRAEL, IT-ITALY, JP-JAPAN,
JO-JORDAN, KZ-KAZAKHSTAN, KP-NORTH KOREA, KR-KOREA REPUBLIC, KU-KUWAIT,
LV-LATVIA, LB-LEBANON, LI-LIECHTENSTEIN, LT-LITHUANIA, LU-LUXEMBOURG,
MO-MACAU, MK-MACEDONIA, MY-MALAYSIA, MT-MALTA, MC-MONACO, MA-MOROCCO,
NL-NETHERLANDS, NZ-NEW ZEALAND, NO-NORWAY, OM-OMAN, PK-PAKISTAN,
PA-PANAMA, PE-PERU, PH-PHILIPPINES, PL-POLAND, PT-PORTUGAL, PR-PUERTO
Note: When using HyperTerminal with Microsoft® Windows® 2000, make sure that you have
Windows 2000 Service Pack 2 or later installed. Windows 2000 Service Pack 2 fixes the problem of
arrow keys not functioning in HyperTerminal’s VT100 emulation. Go to www.microsoft.com for
information on Windows 2000 service packs.
Note: The access point requests an IP address from a Dynamic Host Configuration Protocol
(DHCP) server by default. If a DHCP server does not respond, then the access point uses the
default address, 192.168.1.1, which may not be compatible with your network. To assign an IP
address, you must use the CLI. Go to Step 3.
Note: Units sold in the United States are configured by default to use only radio channels 1-11 as
defined by FCC regulations. Units sold in other countries are configured by default without a
country code (that is., 99). You must use the CLI to set the country code. Setting the country code
restricts operation of the access point to the radio channels and transmit power levels permitted for
wireless networks in the specified country.

Enterasys RoamAbout RBT-4102 Specifications

General

Brand	Enterasys
Model	RoamAbout RBT-4102
Category	Wireless Access Point
Language	English