Enterasys RoamAbout RBT-4102 User Manual

Radio Interface
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-61
Using the CLI to Configure the 802.11a Interface Radio Settings
Fromtheglobalconfigurationmode,entertheinterfacewirelessacommandtoaccessthe802.11a
radiointerface.SettheinterfaceSSIDusingthessidcommandand,ifrequired,configureaname
fortheinterfaceusingthedescriptioncommand.Usetheturbocommandtoenablethisfeature
beforesettingtheradiochannel
withthechannelcommand.
Setanyotherparametersasrequired.
Example
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 4102(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout 4102(if-wireless a)#description "Interface RD-AP4102"
RoamAbout 4102(if-wireless a)#ssid r&d
RoamAbout 4102(if-wireless a)#channel 40
RoamAbout 4102(if-wireless a)#secure-access
RoamAbout 4102(if-wireless a)#transmit-power full
RoamAbout 4102(if-wireless a)#speed 9
RoamAbout 4102(if-wireless a)#max-association 32
RoamAbout 4102(if-wireless a)#beacon-interval 150
RoamAbout 4102(if-wireless a)#dtim-period 5
RoamAbout 4102(if-wireless a)#fragmentation-length 512
RoamAbout 4102(if-wireless a)#rts-threshold 256
RoamAbout 4102(if-wireless a)#exit
RoamAbout 4102#

Enterasys RoamAbout RBT-4102 Specifications

General

Brand	Enterasys
Model	RoamAbout RBT-4102
Category	Wireless Access Point
Language	English