Enterasys RoamAbout RBT-4102 - Snmp; Using Web Management to Configure SNMP

SNMP
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-29
SNMP
Theaccesspointincludesanon‐boardagentthatsupportsSNMPversions1,2c,and3.Accessto
theon‐boardagentusingSNMPv1andv2ciscontrolledbycommunitystrings.Tocommunicate
withtheaccesspoint,amanagementstationmustfirstsubmitavalidcommunitystringfor
authentication.
Access
totheon‐boardagentusingSNMPv3providesadditionalsecurityfeaturesthatcover
messageintegrity,authentication,andencryption;aswellascontrollingnotificationsthataresent
tospecifiedusertargets.
YoucanuseanetworkmanagementapplicationsuchasEnterasysNetworksNetSightConsoleto
managetheRBT‐4102viaSNMP
fromanetworkmanagementstation.
ToimplementSNMPmanagement,theRBT‐4102musthaveanIPaddressandsubnetmask,
configuredmanuallyordynamically.OnceanIPaddresshasbeenconfigured,appropriateSNMP
communitiesandtrapreceiversshouldbeconfigured.
Using Web Management to Configure SNMP
SelectSNMPfromthemenu.