Enterasys RoamAbout RBT-4102 User Manual

RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-1
4
Advanced Configuration
Overview
Thischapterpresentsadvancedconfigurationinformationorganizedaccordingtothestructureof
thewebinterfaceforeasyreference.
EnterasysNetworksrecommendsthatyouconfigureausernameandpasswordtocontrol
managementaccesstothisdeviceasthefirstadvancedconfigurationstep(referto
Administration onpage 4‐38).
Table 4‐1liststhe
configurationoptionsandbriefdescriptions.
Using the Web Interface
YoumustclickontheApplybuttonatthebottomofeachWebinterfacepagefortheconfiguration
changesonthatpagetotakeeffect.
Using the Command Line Interface (CLI)
ForadescriptionofhowtousetheCLI,refertotheRoamAboutRBT‐4102WirelessAccessPoint
CommandLineInterfaceReferenceGuide.
Table 4-1 Advanced Configuration
Menu Description Page
Identification Specifies the system name, location, and contact. 4-3
TCP / IP Settings Enables DHCP, or allows you to configure the IP address, subnet
mask, gateway, and domain name servers.
4-5
RADIUS Configures the RADIUS server for wireless client authentication and
accounting.
4-10
Authentication Configures the access point as an 802.1x authentication supplicant
with the network.
4-14
Filter Control Filters communications between wireless clients, access to the
management interface from wireless clients, and traffic matching
specific Ethernet protocol types.
4-17
CDP Settings Configures the AP to use Cabletron Discovery Protocol (CDP). 4-23
Rogue AP Detection Scans the airwaves and collects information about access points in
the area.
4-26

Enterasys RoamAbout RBT-4102 Specifications

General

Brand	Enterasys
Model	RoamAbout RBT-4102
Category	Wireless Access Point
Language	English