Enterasys RoamAbout RBT-4102 - Administration; Changing the Password

Administration
4-38 Advanced Configuration
Administration
Changing the Password
ManagementaccesstotheWebandCLIinterfaceontheRBT‐4102iscontrolledthroughasingle
usernameandpassword.Youcanalsogainadditionalaccesssecuritybydisablingthecomport
afterconfiguringtheAP,andusingcontrolfilters(referto“FilterControlandVLANs”on
page 4‐17).
Toprotectaccesstothemanagementinterface,youshouldchangetheusernameandpasswordas
soonaspossible.Iftheusernameandpasswordarenotconfigured,thenanyonehavingaccessto
theaccesspointmaybeabletocompromiseaccesspointandnetworksecurity.
Note: Pressing the Reset button on the back of the access point for more than five seconds resets
the user name and password to the factory defaults. For this reason, it is recommend that you
protect the access point from physical access by unauthorized persons.