Enterasys RoamAbout RBT-4102 - Using the CLI to Configure RADIUS

RADIUS
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-13
Using the CLI to Configure RADIUS
Fromtheglobalconfigurationmode,usetheradius‐serveraddresscommandtospecifythe
addressoftheprimaryRADIUSserver,ortheradius‐serversecondaryaddresscommandto
specifythe addressofthesecondaryRADIUSserver.(Thefollowingexampleconfiguressettings
fortheprimaryRADIUSserver.)Usetheradius‐serveror
radiusserversecondaryandkey,port,
port‐accounting,retransmit,timeout,andtimeout‐interimcommandstoconfiguretheother
RADIUSserverparameters.UsetheshowradiuscommandfromtheExecutivemodetodisplay
thecurrentsettingsfortheprimaryandsecondaryRADIUSservers.
Example
RoamAbout 4102#configure
RoamAbout 4102(config)#radius-server address 192.168.1.25
RoamAbout 4102(config)#radius-server port 1812
RoamAbout 4102(config)#radius-server key green
RoamAbout 4102(config)#radius-server timeout 10
RoamAbout 4102(config)#radius-server retransmit 5
RoamAbout 4102(config)#radius-server port-accounting 1813
RoamAbout 4102(config)#radius-server timeout-interim 500
RoamAbout 4102(config)#exit
RoamAbout 4102#show radius
Radius Server Information
========================================
IP : 192.168.1.25
Port : 181
Key : *****
Retransmit : 5
Timeout : 10
Accounting Port : 1813
InterimUpdate vv: 500
========================================
Radius Secondary Server Information
========================================
IP : 0.0.0.0
Port : 1812
Key : *****
Retransmit : 3
Timeout : 5
Accounting Port : DISABLED
InterimUpdate vv: 3600
========================================
RoamAbout 4102#
NAS Identifier Hard coded identifier of the RADIUS Accounting
client.
Acct-Interim-Interval Indicates the number of seconds between each
interim update in seconds for the given session.
Table 4-2 RADIUS Attributes (continued)
RADIUS Accounting Attribute Description