Enterasys RoamAbout RBT-4102 - CLI Commands for Configuring Snmpv3 Users and Groups

SNMP
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-35
localMacAddrAuthSuccess Enabled pppLogonFail Enabled
sntpServerFail Enabled radiusServerChanged Enabled
systemDown Enabled systemUp Enabled
=============================================
RoamAbout 4102#
CLI Commands for Configuring SNMPv3 Users and Groups
Usethesnmp‐serverengine‐idcommandtodefinetheSNMPv3enginebeforecreatinggroupsor
assigninguserstogroups.Usethesnmp‐servergroupcommandtocreategroupswithaspecific
securitylevel.Usethesnmp‐serverusercommandtocreateandassignuserstogroups.Toview
the
currentSNMPv3engineID,usetheshowsnmpcommand.
Examples
RoamAbout 4102(config)#snmp-server engine-id 1a:2b:3c:4d:00:ff
RoamAbout 4102(config)#snmp-server group
Group Name<1-32> :TPS
1. NoAuthNoPriv
2. AuthNoPriv
3. AuthPriv
Select the security level<1,2,3>: [1]:3
Write right<none,write, NULL> :write
RoamAbout 4102(config)#
RoamAbout 4102(config)#snmp-server user
User Name<1-32> :chris
Group Name<1-32> :TPS
md5(Auth) Passphrase<8-32>:a good secret
des(Priv) Passphrase<8-32>:a very good secret
RoamAbout 4102(config)#
ToviewSNMPusersandgroupsettings,usetheshowsnmpusers,showsnmpgroups,orshow
snmpgroup‐assignmentscommands.
RoamAbout 4102#show snmp groups
GroupName :RO
SecurityModel :USM
SecurityLevel :NoAuthNoPriv
GroupName :TPS
SecurityModel :USM
SecurityLevel :AuthPriv
GroupName :RWAuth
SecurityModel :USM
SecurityLevel :AuthNoPriv
GroupName :RWPriv
SecurityModel :USM
SecurityLevel :AuthPriv
RoamAbout 4102#show snmp users
=============================================
UserName :chris
GroupName :TPS
AuthType :MD5