Enterasys RoamAbout RBT-4102 - Using the CLI to Configure WEP Shared Key Security

Security
4-88 Advanced Configuration
Using the CLI to Configure WEP Shared Key Security
Fromtheinterfacewirelessorinterfacewireless:VAPconfigurationmodes,usethe
authenticationcommandtoenableWEPshared‐keyauthenticationandtheencryptioncommand
toenableWEPencryption.Usethecipher‐suitecommandtoselectWEPciphertypefor
broadcastingandmulticasting.ToenterWEPkeys,usethekeycommand(from
theinterface
wirelessmodeonly),andthensetonekeyasthetransmitkeyusingthetransmit‐keycommand.If
necessary,disable802.1xportauthenticationwiththeno802.1xcommand.
Examples
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 4102(config)#interface wireless g
Enter Wireless configuration commands, one per line.
RoamAbout 4102(if-wireless g)#authentication shared
RoamAbout 4102(if-wireless g)#encryption
RoamAbout 4102(if-wireless g)#cipher-suite wep
Unicast Ciphers can accept TKIP only.
Multicast Cipher is set to WEP.
RoamAbout 4102(if-wireless g)#key 1 128 ascii 1234567890123
RoamAbout 4102(if-wireless g)#transmit-key 1
RoamAbout 4102(if-wireless g)#vap 2
RoamAbout 4102(if-wireless g: VAP[2])#authentication shared
RoamAbout 4102(if-wireless g: VAP[2])#enc
RoamAbout 4102(if-wireless g: VAP[2])#cipher wep
Unicast Ciphers can accept TKIP only.
Multicast Cipher is set to WEP.
RoamAbout 4102(if-wireless g: VAP[2])#transmit 1
RoamAbout 4102(if-wireless g: VAP[2])#exit
Note: The index and length values used in the key command must be the same values used in the
encryption and transmit-key commands.