Enterasys RoamAbout RBT-4102 - Page 125

Security
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-89
Toviewthe currentsecuritysettings,usetheshowinterfacewirelessa<vap#>orshowinterface 
wirelessg<vap#>command.
RoamAbout 4102#show interface wireless g
Wireless Interface Information
=======================================================================
----------------Identification-------------------------------------------
Description : RoamAbout AP4102 - 802.11b/g
SSID : WPA
802.11g band : 802.11b + 802.11g
Channel : 6
Status : Enable
----------------Antenna------------------------------------------------
Antenna Select : Fixed
Fixed Antenna Control : Diversity
Antenna ID : 0x0000(Integrated antenna)
Ack-TimeOut : 0 us
----------------802.11 Parameters--------------------------------------
Transmit Power : FULL (20 dBm)
Max Station Data Rate : 54Mbps
Multicast Data Rate : 1Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
DTIM Interval : 2 beacons
Preamble Length : LONG
Maximum Association : 255 stations
Native VLAN ID : 1
VLAN State : DISABLED
----------------Security-----------------------------------------------
Secure Access : DISABLED
Multicast cipher : WEP
Unicast cipher : TKIP-WEP
PMKSA Lifetime : 720 minutes
WPA clients : NOT SUPPORTED
WPA Key Mgmt Mode : DYNAMIC
WPA PSK Key Type : ALPHANUMERIC
Encryption : 128-BIT ENCRYPTION
Default Transmit Key : 1
Common Static Keys : Key 1: ***** Key 2: EMPTY
Key 3: EMPTY Key 4: EMPTY
Pre-Authentication : Disabled
Authentication Type : SHARED
----------------Authentication Parameters------------------------------
802.1X : DISABLED
Broadcast Key Refresh Rate : 5 min
Session Key Refresh Rate : 5 min
802.1X Session Timeout Value : 300 min
=======================================================================
RoamAbout 4102#