Enterasys RoamAbout RBT-4102 - Using Web Management to View Neighbor AP Detection Status

Status Information
4-102 Advanced Configuration
Using Web Management to View Neighbor AP Detection Status
TheNeighborAPDetectionStatuswindowshowsthewirelessclientscurrentlyassociatedwith
theaccesspoint.SelectNeighborAPDetectionStatusfromthemenu.
TheWebinterfacedisplaysalistof802.11aandalistof802.11b/gneighborsdetected.
ClicktheappropriateradiobuttontoSortby:BSSID,Channel,SSID,RSSIand
thenclickSaveas
Defaulttodisplaythe802.11aor802.11b/gNeighborAPlistssortedbyyourselection.
The802.11aor802.11b/gNeighborAPlistsdisplaythefollowinginformation:
•APAddress(BSSID)istheMACaddressoftheaccesspoint.
•SSIDidentifiesthenameofthenetworkassociatedwiththis
accesspoint.
•Channelidentifiestheradiochannelthattheaccesspointusestocommunicatewithwireless
clients.
•Mhzidentifiesthebandwidththeaccesspointusesonthat channel.
•RSSIspecifiesameasureofthepowerofthesignalreceivedfromtheaccesspoint.
•Encryptionindicateswhetherclientsassociating
tothisaccesspointuseencryption