Enterasys RoamAbout RBT-4102 - Page 98

Radio Interface
4-62 Advanced Configuration
Toviewthe current802.11aradiosettings,usetheshowinterfacewirelessacommand.
Example
RoamAbout 4102#show interface wireless a
Wireless Interface Information
===================================================================
----------------Identification-------------------------------------
Description : "RD-AP4102"
SSID : r&d
Turbo Mode : OFF
Channel : 40
Status : Enable
----------------Antenna--------------------------------------------
Antenna Select : Fixed
Fixed Antenna Control : Diversity
Antenna ID : 0x0000(Integrated antenna)
Ack-TimeOut : 0 us
----------------802.11 Parameters----------------------------------
Transmit Power : FULL (10 dBm)
Max Station Data Rate : 9Mbps
Multicast Data Rate : 6Mbps
Fragmentation Threshold : 512 bytes
RTS Threshold : 256 bytes
Beacon Interval : 150 TUs
DTIM Interval : 5 beacons
Maximum Association : 32 stations
Native VLAN ID : 1
VLAN State : ENABLED
----------------Security-------------------------------------------
Secure Access : ENABLED
Multicast cipher : AES
Unicast cipher : AES
PMKSA Lifetime : 720 minutes
WPA clients : NOT SUPPORTED
WPA Key Mgmt Mode : PRE SHARED KEY
WPA PSK Key Type : ALPHANUMERIC
Encryption : DISABLED
Default Transmit Key : 1
Common Static Keys : Key 1: EMPTY Key 2: EMPTY
Key 3: EMPTY Key 4: EMPTY
Pre-Authentication : Disabled
Authentication Type : OPEN
----------------Authentication Parameters--------------------------
802.1X : DISABLED
Broadcast Key Refresh Rate : 0 min
Session Key Refresh Rate : 0 min
802.1X Session Timeout Value : 60 min