A-2 Default Settings
CDP CDP Auto Enable Auto
Hold Time 180 (seconds)
Tx Frequency 60 (seconds)
Port Settings Auto
VLAN Management VLAN Disabled
Management VLAN ID 1
VLAN Disabled
Native VLAN 1
Untagged VLAN ID 1
IAPP IAPP Enabled
Filter Control IBSS Relay All VAP
Wireless AP Management Disabled
Ethernet Type Filter Disabled
Rogue AP Interface a Disabled
Interface b/g Disabled
Duration 350 (milliseconds)
Interduration 3000 (milliseconds)
Interval 720 (minutes)
Authentication Disabled
SNMP Status Enabled
Community (Read Only) public
Community (Read/Write) private
Contact contact
Host public (community string)
Engine ID (SNMPv3) Enabled
Trap Destination Enabled (all traps)
Trap Destination IP Address 0.0.0.0
Trap Destination Community
Name
public
Feature Parameter Default
To Next Page
Loading...
