Enterasys RoamAbout RBT-4102 - Page 60

CDP Settings
4-24 Advanced Configuration
•PortStatus:
– Disable‐disablesthisAPfromusingCDP.
– Enable‐enablesthisAPtouseCDPandtosendinformationaboutitselfatthe specified
TransmitFrequency.
– Auto‐enablesthisAPtouseCDPandtosendinformationaboutitselfonlywhen
neighborsrequestinformation.Default:Auto
Note: The Port Status overrides the Global Status. Make the same selections for both the global
and port status or make sure the port status settings match the behavior you want