Enterasys RoamAbout RBT-4102 - Page 69

SNMP
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-33
•SNMPTargets
– TargetIDisthenameyouentertoidentifytheSNMPtarget.Maximum:32characters
– IPAddressistheIPaddressoftheuser.
– UDPportistheUDPportoftheserver.
– SNMPuseristhenameoftheuser.Thisnamemustmatchthenameyou
enteredinSNMP
Users.
– FilterIDisthefilt erIDthatyouenteredintheSNMPFiltersection.
– ActionAddaddsanewtarget;Edtallowsyoutoeditanexistingtarget;Deldeletesthe
target.
•SNMPFilter
– NewFilteristhenameyouentertoidentifyafilterthatincludes
orexcludescertain
notifications.Maximum:32characters.
– FilterTypespecifieswhetherthefilterincludesorexcludesthespecifiednotification.
Includesmeansthatnotificationsthatarepartofthesubtreewillbefilteredout.Exclude
meansthatnotificationsthatarepartofthesubtreewillbesent.
– SubtreeisanOIDstring
thatspecifiesthefamilyofsubtreesincludedorexclude dbythis
filter.Thestringmustbeprecededwithaperiod(.).
Forexample,.1.3.6.1.
– ActionAddaddsafilter;Edtallowsyoutoeditanexistingfilter;Deldeletesthefilter.