4-120
120 | Printing with EPSON Drivers for Windows
Paper Configuration Settings
To access the paper configuration settings, click the Paper Config button in
the Advanced dialog box. The following settings are available.
PhotoEnhance4 settings
Tone Lets you choose from Normal for standard tone correction,
Hard for high contrast, Vivid for more intense colors (as
defined above), Sepia, Monochrome, and None (no tone
adjustment).
Effect Lets you choose from four special effects (and set the
intensity using the Low/High slider): Sharpness, Soft
Focus, Canvas, and Parchment.
Digital Camera
Correction
Corrects noise and other flaws common to digital camera
images.
Paper Configuration settings
Color Density Controls the ink saturation level (for example, when you turn
off color management in your printer software).
Drying Time
per Print Head
Pass
Use when printing with non-EPSON media. You can make
the print head wait up to 5 seconds after each pass to allow
ink to dry on the page.
Paper Feed
Adjustment
Eliminates light or dark horizontal banding in your printouts.
Paper
Thickness
Eliminates vertical banding and creates a sharper image
when printing on unusually thick or thin paper.
Paper Suction Decreases the paper suction level when printing on thinner
papers (less than 12 lb), such as CAD drafting paper or
backlight film.
Cut Method Decreases the cutting blade pressure for thinner papers, to
provide a cleaner cut.
Note
These settings are
overridden by any paper
configuration settings
you may have made
using the printer’s
control panel (page 84).
To Next Page
Loading...
Need help?
General
