2-69
Handling Paper and Other Media | 69
Guidelines for Using EPSON Papers
Follow these guidelines, as well as those included in your paper package,
when printing on EPSON paper and other media:
• Avoid touching the printable surface with your bare hands. Fingerprints
may affect print quality. Handle media by the edges or use cotton
gloves.
• Always choose the correct Media Type setting in your printer software
before you send your job. See page 96 (Macintosh) or page 112
(Windows) for instructions.
• Always select the correct paper source (roll or sheet) in both the printer
software and on the printer’s control panel. See page 90 (Macintosh) or
page 114 (Windows) for instructions on selecting the paper source in
your printer software.
• Keep unused media in its original packaging and store it in a cool, dry
place to maintain quality. Avoid storing your printouts where they will
be exposed to high temperature, humidity, or direct sunlight.
Using Roll Paper
You can use any roll paper with a 2- or 3-inch core, up to 44 inches wide
(Stylus Pro 9600) or 24 inches wide (Stylus Pro 7600). Manually switching
from one paper roll to another is a simple process.
This section covers the following:
• Guidelines for using roll paper
• Loading roll paper onto the spindle
• Placing roll paper in the printer
• Using the roll paper belt
• Removing paper from the spindle
• Switching between 2-inch and 3-inch roll paper
• Cutting paper manually with the built-in cutter
• Printing trim lines
To Next Page
Loading...
Need help?
General
