Epson 9600 User Manual

1-28
28 | Setting Up the Printer
Accessories:
Assembling the Stand
1. Insert the support bar into one of the base sections as shown. Then
attach it with two bolts (H) using the included Allen wrench. (Leave the
bolts a little loose, so that you can adjust the position when you insert
the bolts at the other end.)
2. Attach the base section to the other end.
3. Tighten all four bolts securely.
G: Allen wrench
H: Bolts (4)
I: Wing nuts, spring washers, and plain washers (2)
J: Paper supports (5)
H
G
I
J
H

Epson 9600 Specifications

General

Maximum Resolution	2880 x 1440 dpi
Max Resolution (BW)	2880 x 1440 dpi
Max Resolution (Color)	2880 x 1440 dpi
Media Thickness	Up to 1.5 mm
Ink Type	UltraChrome Ink
Maximum Print Width	44 inches
Media Handling	Roll and Sheet
Ink Cartridge Type	Individual Cartridges
Connectivity	USB, Ethernet
Media Size	Up to 44 inches wide
Ink Colors	Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta, Light Black
Media Width	Up to 44 inches
Interface	USB 2.0, Ethernet
Operating Systems	Windows, Mac OS
Print Technology	Inkjet