Epson 9600 User Manual

1-54
54 | Setting Up the Printer
Running a Nozzle Check
The nozzle check prints a pattern of dots that lets you see if any print head
nozzles are clogged. Follow the steps below to print a nozzle check from your
printer software (this also lets you verify that your printer is connected and
working properly).
1. Make sure the printer is turned on and the paper that came with your
printer is loaded.
2. Do one of the following:
• Macintosh: Open an application and choose Print from the File
menu. Then click the utility button.
• Windows: Click Start, point to Settings, and select Printers.
Right-click your printer icon, and then select
Properties (Windows
95, 98, or Me),
Document Defaults (Windows NT) or Printing
Preferences (Windows 2000). Then click the Utility tab.
• Windows XP: Click Start and select Control Panel. Double-click
Printers and Other Hardware, then double-click Printers and
Faxes
. Right-click your printer icon and select Printing
Preferences. Then click the Utility tab.
You see the Utility menu:
TIP
Use the paper that came
with your printer for
printing the nozzle check.
That way, you can save
your higher-quality paper
for actual print jobs.
Click to run the
head cleaning
utility
Click to run a
nozzle check

Epson 9600 Specifications

General

Maximum Resolution	2880 x 1440 dpi
Max Resolution (BW)	2880 x 1440 dpi
Max Resolution (Color)	2880 x 1440 dpi
Media Thickness	Up to 1.5 mm
Ink Type	UltraChrome Ink
Maximum Print Width	44 inches
Media Handling	Roll and Sheet
Ink Cartridge Type	Individual Cartridges
Connectivity	USB, Ethernet
Media Size	Up to 44 inches wide
Ink Colors	Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta, Light Black
Media Width	Up to 44 inches
Interface	USB 2.0, Ethernet
Operating Systems	Windows, Mac OS
Print Technology	Inkjet