Epson 9600 User Manual

1-53
Setting Up the Printer | 53
Windows 95 or NT: Turn on your printer and go to step 7.
Windows 98, Me, or 2000: When you see a window asking you to turn
on your printer, press the P
Power button. Then go to step 7.
Windows XP:
• When you see a window asking you to turn on your printer, press
the P
Power button.
• If you see a message that your printer is not connected properly,
ignore it (do not click
Retry or Cancel). If necessary, drag the
window to the side.
• Wait until you see the Found New Hardware Wizard for the Stylus
Pro 7600 or 9600. This may take a minute or two.
• Once the Found New Hardware Wizard appears, click Install from
a list or specific location
, then click Next.
• Locate the Drivers\UC\Win2K_XP folder (for UltraChrome) or the
Drivers\PD\Win2K_XP folder (for Photographic Dye) on your
CD-ROM drive, as shown below. Then click
Next.
7. When you see a message informing you that installation is complete,
click
OK or Finish. If asked to do so, restart your computer.
8. If any screens remain open or continue to open, close them to exit.

Epson 9600 Specifications

General

Maximum Resolution	2880 x 1440 dpi
Max Resolution (BW)	2880 x 1440 dpi
Max Resolution (Color)	2880 x 1440 dpi
Media Thickness	Up to 1.5 mm
Ink Type	UltraChrome Ink
Maximum Print Width	44 inches
Media Handling	Roll and Sheet
Ink Cartridge Type	Individual Cartridges
Connectivity	USB, Ethernet
Media Size	Up to 44 inches wide
Ink Colors	Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta, Light Black
Media Width	Up to 44 inches
Interface	USB 2.0, Ethernet
Operating Systems	Windows, Mac OS
Print Technology	Inkjet