What to do if my Epson Disc Duplicator displays 'No ink cartridge (C,LC,LM,M,Y,K)'?
If your Epson Disc Duplicator shows a 'No ink cartridge (C,LC,LM,M,Y,K)' error, the ink cartridge of the displayed color is either not installed or not correctly installed. Make sure to correctly install the indicated cartridge.
What to do if my Epson Disc Duplicator displays 'Ink problem (C,LC,LM,M,Y,K)'?
If the Epson Disc Duplicator displays the message 'Ink problem (C,LC,LM,M,Y,K)', it indicates that an invalid ink cartridge is installed. Replace the cartridge of the color indicated in the error message.
What does 'User name or password cannot be used' mean on my Epson Disc Duplicator?
If you see the message 'User name or password cannot be used' on your Epson Disc Duplicator, it's likely that the username or password was entered incorrectly. Ensure you enter the correct username and password, noting that these entries are case sensitive.
I forgot the password for my Epson Disc Duplicator, what can I do?
Please ask the administrator to change the password.
How to fix Epson DiscProducer PP-100N arm move error?
If the Epson Disc Duplicator arm cannot be moved, follow these steps: First, turn off the power. Next, open the disc cover and carefully remove any dust or foreign objects that you find inside. Finally, turn the power back on. If the error persists after these steps, it indicates a need for repair and you should contact Customer Support.
What to do if Epson DiscProducer PP-100N says stacker 4 full?
If your Epson Disc Duplicator displays 'Stacker 4 full', the initialization operation cannot proceed. To resolve this, remove the discs from Stacker 4.
What to do if Epson Disc Duplicator has disc drop error?
If your Epson Disc Duplicator experiences a disc drop error while transferring a disc, remove the dropped disc. Then, turn off the power to the duplicator and turn it back on.
How to troubleshoot Epson DiscProducer PP-100N disc pickup error (ST1/2)?
If the Epson Disc Duplicator cannot pick up the disc in the stacker, and the indicated stacker is an input stacker, fully separate and reload the discs in the stacker.
What to do if Epson DiscProducer PP-100N shows stacker full ST2, ST3, ST4?
If the Epson Disc Duplicator displays 'Stacker full ST2, ST3, ST4', it means the output stacker is full and the disc cannot be ejected. To solve this, remove the discs from the output stacker (Stacker 2, Stacker 3, or Stacker 4).
How to resolve Epson DiscProducer PP-100N Disc Duplicator disc feed error PRN?
If you encounter a 'Disc feed error PRN' with your Epson Disc Duplicator, it means the disc was not properly transferred to the printer. To fix this, first remove the discs from the printer tray. Then, fully separate and reload the discs into the input stacker. Finally, close the disc cover.
General| Capacity | 50 discs |
|---|---|
| Interface | Ethernet |
| Product color | Black, Grey |
| Printing colors | Black, Cyan, Light cyan, Light magenta, Magenta, Yellow |
| Country of origin | China |
| Quantity per pack | 1 pc(s) |
| Media types supported | CD-R, DVD-R, DVD+R, DVD-R DL, DVD+R DL |
| Optical disc diameter | 120 mm |
| Publishing speed (CD) | 30 discs/hour |
| Publishing speed (DVD) | 17 discs/hour |
| Number of CD/DVD drives | 2 |
| Compatible operating systems | Windows 7, Windows 8 (32/64 bit), Windows Server 2003 (32/64bit), Windows Server 2008 (32/64bit), Windows Server 2012 (64bit), Windows Vista, Windows XP |
| Print speed (speed mode) | 60 discs/hour |
| Print speed (quality mode) | 42 discs/hour |
| Print resolution (speed mode) | 1440 x 1440 DPI |
| Print resolution (quality mode) | 1440 x 720 DPI |
| CD write speed | 40 x |
| DVD-R write speed | 12 x |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN | Yes |
| Pallet width | 800 mm |
| Pallet height | 1011 mm |
| Pallet length | 1200 mm |
| Pallet width (UK) | 1000 mm |
| Quantity per pallet | 6 pc(s) |
| Quantity per pallet layer | 2 pc(s) |
Weight and Dimensions| Package depth | 725 mm |
|---|---|
| Package height | 525 mm |
| Package weight | 29200 g |
| Dimensions (WxDxH) | 730 x 530 x 522 mm |
Explains essential safety precautions for operating the product.
Identifies and describes the parts on the front of the product.
Identifies and describes the parts on the back of the product.
Step-by-step guide to powering on the product.
Details the procedure for installing the necessary software for the product.
Introduces the EPSON Total Disc Maker software and its functions.
Instructions on how to access the printer driver settings interface.
Configuration of basic label printing settings in the driver's main screen.
Overview of different disc publishing modes available (Standard, External, Batch).
Lists and describes disc types suitable for printing on the label surface.
Guidelines for proper handling of discs during use to ensure quality.
Steps to register data that will be written to the discs.
Guide to choosing predefined templates for label design.
Procedure for adding and modifying text elements on the disc label.
How to view the history and details of past publishing jobs.
Saving custom label designs as templates for reuse.
Checking maintenance information
Monitoring the amount of ink remaining in cartridges.
Performing a test print to check for clogged print head nozzles.
Instructions for cleaning the outer surfaces of the product.
Steps for cleaning the internal components and stackers.
Methods to determine when the ink pad requires replacement.
Lists common error messages and their corresponding solutions.
Solutions for issues related to power and the control panel.
Verifying EPSON Total Disc Monitor for error messages.
Verifying product power status and error indicators.
Ensuring proper Ethernet cable connection and compatibility.
Steps to check if the product's printer driver is correctly installed.
Checking and resuming the printer's print manager if paused.
Provides fundamental details like dimensions and weight of the product.
Details about printing resolution, speed, and nozzle counts.
To Next Page
