Epson Expression 10000XL Service Manual

Expression 10000XL Revision A
DISASSEMBLY/ASSEMBLY Disassembly Procedure 44
4.2.6
Removal of Carriage Unit and Carriage Shaft A/B
1. Remove the Main Board Cover. (Refer to 4.2.5 Removal of Main Board Step 2 to
Step 5.)
2. Remove the Carriage FFC (2 pcs) from the Main Board Connector.
3. Remove the Carriage FFC Fixing Sheet from the notches of the Cover A.
Figure 4-18. Removal of Carriage FFC and FFC Fixing Sheet
4. Remove the one screw (CBP, M3x10) that are securing the FFC Fixing Plate.
5. Slide the FFC Fixing Plate in the direction of the arrow and lift it, then pull the
Carriage FFC (2 pcs) out from the plate and remove the FFC Fixing Plate.
Figure 4-19. Removal of FFC Fixing Plate
6. Remove the two-sided tape which is stuck to the Carriage FFC from the Cover A, and
pull the Carriage FFC out from the Main/Power Supply Board Bracket.
Figure 4-20. Removal of Carriage FFC
7. Move the Carriage Unit to the notch position shown in the following figure.
Figure 4-21. Moving the Carriage Unit
When reinstalling the FFC Carriage, be sure to put it through the
Ferrite Core.
Carriage FFC Main Board
FFC Fixing Sheet
Notch
Cover A
FFC Fixing Plate
M3x10
(50±10Ncm)
Ferrite Core
Main/Power Supply Board Bracket
Sticking position of two-sided tape
Housing Lower Carriage Unit
Notch

Epson Expression 10000XL Specifications

Resolution

optical resolution	2400 dpi
maximum resolution with Micro Step Drive technology	2400 x 4800 dpi
interpolated resolution	12, 800 x 12, 800 dpi

Power

voltage	AC 100V-120V, 220V-240V
frequency	50-60Hz
power consumption operating without optional unit	45W
power consumption operating with optional unit	55W
power consumption sleep mode without optional unit	6W

Operating Environment

operating temperature	41ºF to 95ºF (5ºC to 35ºC)
operating humidity	10% to 80% (no condensation)
storage humidity	10% to 85% (no condensation)

Interface and Connectivity

interface	USB 1.1/2.0, IEEE 1394 (FireWire), optional Ethernet
system compatibility	Windows 98SE, 2000 Me, XP; Macintosh OS 9.1 or later

Weight and Dimensions

maximum scan area	12.2" x 17.2" (310mm x 437mm)
width	25.8" (656mm)
depth	18.0" (458mm)
height	6.2" (158mm)
weight	28.7 lb (13 kg approx.)