Epson G20 Series

Maintenance 3. Covers
118 G10 / G20 Rev.20
3.8 Base Bottom Cover
The base bottom cover is removed only when replacing the gasket unit.
Unscrew the base bottom cover mounting bolts and remove the cover.
G10/G20
-***C* (Cleanroom-model)
G10/G20
-***D*, P* (Protected-model)
Table Top
mounting
8-M3×8
8-M3×8
Gasket
Ceiling
mounting
8-M3×8
8-M3×8
Gasket
A gasket is installed to G10/G20-***D*, P* (Protected-model).
A base bottom cover is not installed to G10/G20-***S* (Standard-model).

NOTE