Epson G20 Series

Setup & Operation 2. Specifications
G10 / G20 Rev.20 37
2.3.4 G10-65***, G10-85***: For S/N: 1**** or later
G10-65***, G10-85*** manipulator of S/N: 1**** or later is different from other models
in its form. The additional screw holes processed on G10-85*** are not for the end
effector or other equipments.
Standard model
G10-65*S*
G10-85*S*
Heat sink
Heat sink
Screw hole
G20-85*S* (Same as before)
Cleanroom model
G10-65*C*
G10-85*C*
Heat sink
Heat sink
Screw hole
G20-85*C* (Same as before)
Protection model
G10-65*P*
G10-85*P*
Heat sink
Heat sink
Screw hole
G20-85*P*
(Same as before)