Basic Printing
1-4
The default Paper Source is
Auto Sheet Feeder, for the
built-in sheet feeder at the front of your printer. (For
instructions on printing with other feeders, see Chapter 3.)
9. Choose the
Paper Size setting, number of copies, collation
options, orientation, and printable area. (Your software
application may let you control some of these settings.
With Windows NT, there are no collation options.)
10. Click the
Main tab and check the Current Settings box on
the bottom of the menu to see if the other settings are
correct for your document. If you need to adjust them, use
Advanced mode as described in Chapter 2.
11. Click
OK when you’re finished checking your settings. The
dialog box closes.
12. In your application’s printing dialog box, click
Close, OK,
or
Print. (You may need to click a series of these buttons,
depending on the program you’re printing with.)
While you’re printing, the
EPSON Despooler dialog box
appears, showing the printing progress and the status of your
printer. (With Windows NT, you don’t see the Despooler.) See
“Checking Printer Status” on page 1-7 for more information.
Click to select your
paper size
Click to select your
paper source
Note:
Whenever you change the
Paper Source, Paper Size,
or Orientation settings,
check the printer
illustration in the dialog
box to see how your
document will print.
If you load your paper long
edge first, select a
landscape paper size,
such as Letter
(Landscape), and then
select your print
orientation so the printer
knows which way you
loaded the paper.
Keep in mind that some
application software may
have paper size and
orientation settings that
override your printer
software settings.
To cancel your changes
and exit the printer
software, click the Cancel
button at the bottom of
the menu at any time.
basic.fm5 Page 4 Friday, May 9, 1997 1:43 PM
To Next Page
Loading...
Need help?
General
