Epson Stylus Color 1520 User Manual

Printing on Special Media
3-15
4. Make sure the thickness lever is in the 0 position; see
page 3-11 for instructions.
5. Remove the manual feeder from the top of the printer by
pulling it straight back. Then set it aside.
6. Install the cable cover by inserting the three posts on the
cover into the three holes on the back of the printer. Press
the cover down until it locks in place.
To hold the printer cables away from your paper supply,
loop them into the hooks underneath the cable cover.
7. Pull up the sprocket-lock levers to unlock them so you can
slide the sprockets into position.
8. Slide the left sprocket all the way right until it stops. Press
down the sprocket-lock lever to lock it in place.
sprocket-lock levers
center support
media.fm5 Page 15 Friday, May 9, 1997 1:48 PM

Epson Stylus Color 1520 Specifications

General

Color	Yes
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Maximum input capacity	100 sheets
Envelopes sizes	10, C5, DL
Standard media sizes	4\
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
ISO B-series sizes (B0...B9)	B5
Power requirements	120V AC, 50/60 Hz
Printing noise level	45 dB
Maximum operating temperature range (T-T)	-20 - 60 °C
Market positioning	Home & office