Epson Stylus Color 1520 User Manual

Printing on Special Media
3-16
9. Slide the right sprocket to the approximate width of your
paper. Then position the center support midway between
the two sprockets, as shown in the previous illustration.
10. Flip open both sprocket covers.
11. Arrange the continuous paper stack so the printable side is
face up. Fit the first four holes over the sprocket pins on
both sprockets; then close the sprocket covers.
12. Slide the right sprocket to remove any slack in the paper.
Then press down the sprocket-lock lever to lock it in place.
If necessary, align your stack of continuous paper so it will
feed straight into the tractor feeder.
Note:
The maximum printable
width is 13.6 inches
(345 mm) on any size
paper.
sprocket covers
media.fm5 Page 16 Friday, May 9, 1997 1:48 PM

Epson Stylus Color 1520 Specifications

General

Color	Yes
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Maximum input capacity	100 sheets
Envelopes sizes	10, C5, DL
Standard media sizes	4\
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
ISO B-series sizes (B0...B9)	B5
Power requirements	120V AC, 50/60 Hz
Printing noise level	45 dB
Maximum operating temperature range (T-T)	-20 - 60 °C
Market positioning	Home & office