Epson Stylus Color 1520 User Manual

Printing on Special Media
3-32
5. If you want to print another roll paper project, the printer
will feed the roll paper back to the loading position when it
receives a new print job. Go to step 10.
If you won’t be using the roll paper again right away,
continue with step 6.
6. Press the
Load/Eject button to eject the paper backward.
7. Using your hands, roll back the paper all the way out of the
manual feed slot and onto the roll. When it’s completely
out, the
Pause and Paper Out S lights turn on.
8. Press the
Pause button to turn off the lights.
9. If you’ll be using the roll paper soon after printing on
another type of paper, lower the banner paper cutting guide
and push it onto the edge of the output tray until it clicks.
This keeps it out of the way of the ejected paper.
If you won’t be using your roll paper for awhile, store it in
its original packaging. See Appendix C for optimum
storage conditions.
You can use the banner paper holders as your edge guides
on the manual feeder, but if you want to remove and
reinstall the manual feeder’s original edge guides, follow
steps 2 through 4 on page 3-23. Then reattach the manual
feeder to the printer.
media.fm5 Page 32 Friday, May 9, 1997 1:50 PM

Epson Stylus Color 1520 Specifications

General

Color	Yes
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Maximum input capacity	100 sheets
Envelopes sizes	10, C5, DL
Standard media sizes	4\
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
ISO B-series sizes (B0...B9)	B5
Power requirements	120V AC, 50/60 Hz
Printing noise level	45 dB
Maximum operating temperature range (T-T)	-20 - 60 °C
Market positioning	Home & office