Epson StylusPro 10000 - 4.2 Disassembly Flow

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
19
4.2 Disassembly Flow
Refer to the following flowchart when determining the Disassembly flow.
Figure 4-2. Disassembly Process Flowchart
4.2.1 Remove Housing
4.2.2 Remove Circuit Board
Panel Unit
Power Board
4.2.3 Disassemble Printer Mechanism
Waste Ink Unit
Replace Waste Ink Unit
Paper Set Lever
RSideCover
LSideCover
I/C Holder Cover
H Top Cover
Rear Cover
Paper Guide L
Roll Paper Cover
Front Cover
Paper Guide U
HJFK / Dummy Board
C362MAIN Board
CSIC Board
C362DRV Board
P/S Fan
Suction Fans
Printheads / CR Board
Cutter / Cutter Unit
CR Encoder Sensor
P_Edge Sensor
Ink Cartridge Holder & Slots
Ink Cartridge Sensor
CR Motor/Pulley
PF Encoder
Flushing Box
Suction Control Motor
Ink Pump ASSY
T Fence (Scale 180a)
CR_HP Sensor
Paper Release Sensor
P_FRONT Sensor ASSY
P_THICK Sensor
Dot Missing detector
Creaning Unit
PF Moter
Paper Hold Sorenoid
HEAD_SLIDE Sensor ASSY
PG Motor / Drive Gear
P_REAR Sensor ASSY
Front Cover Sensor ASSY
I/C Holder Cover Sensor ASSY