50
5.3.4.16 Print head cleaning
This is the item that is carried out at the time of the end of the production process or before
the head exchange.
Following figure showing the head washing menu sequence.
Figure 5-77.
Enter
Enter
Enter
Set Discharge I/C
Set Wash I/C
Ink Blowing
Set Discharge I/C
Head washing
Washing liquid Blowing
Adj : Counter Clear
Skip the Ink Blowing
Skip the Head Washing
Endwith"Enter"key.
C A U T I O N
n Do not carry out the counter clear of the menu that is displayed
at the end of the head washing.
n If the "Adjustment counter clear" was displayed, turn off the
power supply of the printer and get out of from the self
diagnostic operation mode.
Reason: Even the binding of the dye/paint is cleared by the
counter clear. After then, the printer becomes dye/paint selecting
condition, in the case that there is not the ink cartridge for
starter and you can not go ahead previously.
To Next Page
Loading...
