Epson StylusPro 10000 - Start-Up Procedure

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
13
5.3.1 Start-up procedure
Following Button operation that triggers self-diagnostic function.
1)Power off condition
2)Press and hold the "Paper Feed UP", "Paper Feed, DOWN "and "Cut/Eject" button.
3)Turn on the power.
4)Display the Self-Diagnostics menu.
5)Finish with power down.
Parameter
Initialize
rubbing
history
- -
Waste ink
history
--
CR motor
history
- -
PF motor
history
--
Lever history - -
Cover history - -
Ink cover
history
- -
Update
Cap position - -
Head rank *1 - -
Print position - -
Paper length - -
Mechanical
parameter
Rflash -
Lflash -
FtoH -
HtoCut -
EtoH -
RtoH -
Inkchargeflag
set
-
Inkchargeflag
clear
-
Display - -
Table 5-10. Self-Diagnostic Menu Stratum
Life
CR motor - - -
PF motor - - -
CR+PF motor - - -
Cutter - - -
Head U/D - - -
Head lock - - -
Lever lock - - -
Cleaning - - -
Wait printing - - -
Shutter - - -
Total
reliability
- - -
Check - - -
Table 5-10. Self-Diagnostic Menu Stratum