Epson StylusPro 10000 - Bi-D Adjustment

To Next Page

To Previous Page

EPSON Stylus Pro 10000/10000CF Revision B

Adjustment

elf-Diagnostics

5.3.4.10 Bi-D adjustment

Printing position adjustment with Bi-D printing. Adjust the print position for each color of

head 1 to 3. Print the test pattern and make sure the print quality of CW print position and

CCW print position then input the value of difference.

Following t

able showing adjustment menu. Figure 5-64, ""and Figure 5-65, "" showing

menu sequence and Figure Figure 5-66, "" shouwing print pattern. .

Figure 5-64.

Table 5-14.

Item Description

Bi-D 240, V1. K 240 CPS with black ink.

Bi-D 240, V1. C 240 CPS with cyan ink.

Bi-D 240, V1. M 240 CPS with magenta ink.

Bi-D 240, V1. LC 240 CPS with light cyan ink.

Bi-D 240, V1. LM 240 CPS with light magenta ink.

Bi-D 240, V1. Y 240 CPS with yellow ink.

Bi-D 300, V2. K 300 CPS with black ink.

Bi-D 300, V2. C 300 CPS with cyan ink.

Bi-D 300, V2. M 300 CPS with magenta ink

Bi-D 300, V2. LC 300 CPS with light cyan ink

Bi-D 300, V2.LMK 300 CPS with light magenta ink

Bi-D 300, V2. Y 300 CPS with yellow ink

Item

SelecType

Enter

Start the print with "Enter" key.

Printing Pattern

BiD 240.V1.K 0

BiD 240.V1.C 0

BiD 240.V1.M 0

BiD 240.V1.LC 0

BiD 240.V1.LM 0

BiD2 40.V1.Y 0