Epson StylusPro 10000 - A123 Slant Adjustment

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
40
5.3.4.8 A123 slant adjustment
Print the test pattern and make sure the print quality by referencing the Figure 5-60, "". If
the slant condition is presented, perform the mechanical adjustment.
This test using A1,A2 and A3 nozzle.
Following figure showing menu sequence.
Figure 5-60.
<Print sample>
1.Check items: Black lines, Light Cyan lines and Magenta lines are continue as same level
by a magnifying glass with scale.
2.Printing method.
o One pass with Uni-D at 360dpi resolution for CR and 45 dpi for PF.
Figure 5-61.
Item
SelecType
SelecType
Enter
Printing Pattern
Adjust the slant?
Wait a moment
Wait a moment
Endwith"Pause"key.
Output Pattern
A13 Slant Check End
Shift to "A123 Slant Check End"
menu by pressing "Pause" key.
Shift to "B123" or "A123" slant check
menu with following key operation.
"Enter" key: B123 slant check.
"Pause" key: A123 slant check.
Shift to"A123" slant check menu with
"Pause" key.
Print out the pattern with "Enter"
K
LC M MLCK
When check the slant, regard thejoint
department shown here.