Epson StylusPro 10000 - Paper Set Lever Removal

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
22
4.2.1.2 Paper Set Lever Removal
1. Remove the R Side Cover.(Refer to “R Side Cover Removal 124.)
2. Lift up the “Paper Set Lever” to the released position.
3. Remove two screws (CBP:M4 x 10) and remove the “Pressure lever knob”.
Figure 4-8.
4. Remove therr screws (CBP:M4 x 10) and remove the “R guide cover”
Figure 4-9.
5. Remove a E ring fixing Paper set lever on the axis.
Figure 4-10.
6. Sliding the axis to the left and remove Paper set lever.
Figure 4-11.
Pressure lever knob
Screws
Screws
Paper set lever
Ering
Axis